Impeccable Ways To Resolve Canon Printer Common Errors

Printers can run without fail for many years and print thousands of prints, but often they do not. Sometimes it is as simple as over or under use of the printer. Canon printers are the most reliable machines used so far and are most demanding in the environment. The Canon printers are one of the well-liked printers in the market nowadays. But sometimes you may experience some technical glitches in the printer. The canon printers, just like any others, are subject to technical difficulties but you should be able to fix the problem easily enough. There are a number of problems which you can confront while dealing with an canaon printer. To fix Canon Printer troubles you can simply read out the following instructions and fix them instantly:-

Print job isn’t printing

In windows follow the following steps:-

·         Tap start and select Printers and Faxes. Right-click on the correct printer.

·         Set your Canon printer settings as default printer.

·         Ensure what type of paper your print requires.

·         In case your printer just won’t print and get stuck in the queue, the easiest elucidation is to delete the print job and restart. Begin by restarting your software application. If that doesn’t work, reboot your computer. As in restart not boot as in kick.

·         Finally, turn off your printer for a few minutes before switching it back on.

Printing is too slow.

Sometimes large files with intricate images take much time to print than smaller, it’s due to the superior resolution of the image. If probable, try to print devoid of graphics from the web to fasten the printing speed. If you still face the low speed of your printer then it’s better to contact an expert technician of Canon printer support dialing toll free number and fix your printer problems instantaneously.

For this:-

•             Decrease the font size of the documents.

•             Change the settings to draft mode for printing, it requires low ink.

Ghosting

Ghosting is a process where the image prints properly, but a lighter copy of the print image also prints somewhere else. This problem is due to issue with the power outlet that is supplying power to the printer. For resolving, this error check the power outlet by plugging in a different printer to see if the same results occur. It mostly happens when the drum or imaging kit is near the end of their life. So for this, it’s better to purchase a new one and resolve the problem. But if you are still facing the error after changing the drum kit then contacting printer’s technical support website is the right choice.

 Toner smears come out on the paper

While printing if words and images come off the paper there are a few possible problems which may cause this problem. Repairing a fuser assembly is usually not suggested because the fuser is measured a consumable printer part and there is no need to fix it. The other reason of this issue may be the toner cartridge which is letting too much toner out at one time. The solution of this issue is to replace the toner cartridge.