Monday 30 May 2016

Impeccable Ways To Resolve Canon Printer Common Errors





Printers can run without fail for many years and print thousands of prints, but often they do not. Sometimes it is as simple as over or under use of the printer. Canon printers are the most reliable machines used so far and are most demanding in the environment. The Canon printers are one of the well-liked printers in the market nowadays. But sometimes you may experience some technical glitches in the printer. The canon printers, just like any others, are subject to technical difficulties but you should be able to fix the problem easily enough. There are a number of problems which you can confront while dealing with an canaon printer. To fix Canon Printer troubles you can simply read out the following instructions and fix them instantly:-
Print job isn’t printing
In windows follow the following steps:-
·         Tap start and select Printers and Faxes. Right-click on the correct printer.
·         Set your Canon printer settings as default printer.
·         Ensure what type of paper your print requires.
·         In case your printer just won’t print and get stuck in the queue, the easiest elucidation is to delete the print job and restart. Begin by restarting your software application. If that doesn’t work, reboot your computer. As in restart not boot as in kick.
·         Finally, turn off your printer for a few minutes before switching it back on.
Printing is too slow.
Sometimes large files with intricate images take much time to print than smaller, it’s due to the superior resolution of the image. If probable, try to print devoid of graphics from the web to fasten the printing speed. If you still face the low speed of your printer then it’s better to contact an expert technician of Canon printer support dialing toll free number and fix your printer problems instantaneously.
For this:-
•             Decrease the font size of the documents.
•             Change the settings to draft mode for printing, it requires low ink.
Ghosting
Ghosting is a process where the image prints properly, but a lighter copy of the print image also prints somewhere else. This problem is due to issue with the power outlet that is supplying power to the printer. For resolving, this error check the power outlet by plugging in a different printer to see if the same results occur. It mostly happens when the drum or imaging kit is near the end of their life. So for this, it’s better to purchase a new one and resolve the problem. But if you are still facing the error after changing the drum kit then contacting printer’s technical support website is the right choice.
 Toner smears come out on the paper

While printing if words and images come off the paper there are a few possible problems which may cause this problem. Repairing a fuser assembly is usually not suggested because the fuser is measured a consumable printer part and there is no need to fix it. The other reason of this issue may be the toner cartridge which is letting too much toner out at one time. The solution of this issue is to replace the toner cartridge.

Thursday 26 May 2016

Tips and Tricks to Add Wireless Network to A HP Printer




Wireless printers are the most important and increasingly growing in demand printers because such printers are trouble-free to share and can be set just anywhere you wish. The majority of the wireless printer will run smoothly if the printers are primarily set with the details of your wireless network, and if you chase the printer's installation procedure attentively then you can run your printer flawlessly. If the process freezes out, then follow the below- given tips to get things back to their original position.
HP printers can be added to the wireless network in a number of ways, depending on which model of printer you are using. There are a few ways which help you to make your printer, computer, and network turned properly and ready for action. https://printerstechsupport.quora.com/HP-Printer-Technical-Support-for-Instant-Troubleshooting
Wi-Fi Protected Setup Pushbutton Mode
First of all, verify that your configuration meets the basic conditions:
1. In order to connect your printer with a wireless network the printer and wireless router must support WPS pushbutton mode. As there are many makes and models, you will need to consult HP Printer support phone number to verify compatibility of your printer.
·         Your network must use WPA or WPA2 set of rules. WPS wireless routers, in general, won't connect with the WPS method.
·         If you're using the router's default network name and no security then WPS routers won't connect.
2. Start the WPS pushbutton mode on your printer. As setting, this mode depends on the particular model of printer you are using, check with the manual list to accomplish the process.
Once your networks WPS mode is engaged on the printer press the WPS button on your router and use it successfully.
In case these steps are not helpful in adding HP printer on a wireless network, then you can take the help of a reliable third party support providing company which proffers you Technical support for Hp printer and resolve your issues in a skillful manner at very affordable rates.
Connecting your wireless printer
·         Connecting your wireless printer
·         Unpack your printer.
·         Follow the setup instructions to remove packaging.
·         Plug in the power cord, turn on the printer and install print cartridges. Allow the printer to go through its startup routine, including printing an alignment page (if applicable).
·         Choose one of the connection methods described below. If your printer supports it and you choose an Ethernet (wired) connection, connect it now and skip to installing the printer software. Note: while using an Ethernet connection the printer's wireless system is disabled. http://printershelpdesk.blog.com/2016/03/22/solve-technical-issues-in-hp-printers/
If you want to print wirelessly without a wireless router, then visit the official website of HP printer and get quality support for the same.

Wednesday 25 May 2016

Will your printer work with Windows 10?



On the off chance that your PC utilizes Windows 7, 8 or 8.1, you may have seen Microsoft is doing all that it can to urge you to move up to Windows 10 – not minimum by making it a free update, but rather likewise by the presence of a (somewhat aggravating) symbol in the lower right of your screen.
Before you do, it merits checking you'll have the capacity to utilize your printer a short time later. At the point when Windows 7 dispatched in 2009, it took weeks and for some situation months for some printer makers to make Windows 7 drivers accessible for prevalent models – and not all printers were made good, rendering them outdated in the event that you had updated.
We addressed the makers to discover which printers are prepared for the Windows 10 time.  Support to fix printer problems
Which printers work with Windows 10?
The uplifting news is that basically any printer purchased in the most recent three years – or any printer that you've effectively utilized with Windows 7, 8 or 8.1 – ought to be perfect with Windows 10, which means you shouldn't have to do something besides overhaul the OS itself. To help, we've likewise made a rundown of all the Windows 10 perfect printers we've tried.
In the event that you need to twofold check then you'll additionally find that printer makers list Windows 10 good printers on their sites. You'll likewise have the capacity to discover downloadable drivers in the event that you keep running into issues while overhauling and need to introduce one physically. Windows 10 printer driver technical support phone number
Are old printers perfect with Windows 10?
It relies on upon the printer. Group let us know it wanted to bolster all Pixma printers dispatched in the most recent five years. And all HP printers right now at a bargain will be upheld as per HP – the organization additionally let us knows that models sold from 2004 onwards will work with Windows 10. http://printershelp.support
Sibling said that the greater part of its printers will work with Windows 10, utilizing either a print driver incorporated with Windows 10, or a Brother Printer driver. It guarantees even 10 year-old models will print utilizing the Windows 10 driver, yet you might be constrained to just essential printing alternatives like changing page introduction, the quantity of duplicates or twofold sided printing. A Brother driver ought to give more choices.
It's a comparative circumstance with Samsung. Printers discharged after June 2013 ought to be good straight away and for different printers you can utilize either a Windows 8.x driver or Samsung Universal Printer Driver to continue printing after the update.
Epson printers dispatched in the most recent 10 years are Windows 10 good, as indicated by Epson. Like Brother, it says you ought to have the capacity to utilize the inherent Windows 10 drivers to continue printing with a more seasoned model, however with just essential printing choices.
Overhauled and your printer doesn't work?

On the off chance that you've as of now moved up to Windows 10 and found your printer doesn't – and won't ever – work, you have two decision: firstly, you can move back to Windows 7, 8 or 8.1.

Tuesday 24 May 2016

Steps To Fix Network Printer Connectivity Issues



Printers are useful devices which are used in schools, colleges, and offices. It helps in printing your documents in an easy manner. Connecting your device to a wired printer is easy. Pick the cable, and then plug it one end into the printer and other into a computer. By doing this all things go in a smooth manner but sometimes it's still complicated than plugging in a cable. There are various reasons for these printer connectivity problems so for resolving this problem users can do a lot of things like choosing the correct IP address, installing a right operating system, configuring a right IP address. In case you have purchased a new printer and many times while working on it, the printer stopped working because of the network connectivity issues then for this people generally install a new wireless printer if they are enabled to configure the network settings in the printer itself.
If you want to solve these wireless communication problem then its pretty simple by configuring your computer server with the right static IP addresses. In case you are not able to resolve this connectivity problem, then contacting a Technical support for wireless printer connection is the right choice. Experts help you in resolving these issues instantly.
Below are the steps which help you in resolving this issue:-
Selecting a valid IP address for the printer
If you don’t know in which IP address your router is using, then go to Start, type cmd, and press Enter. In the Windows Command Prompt settings, type IP config, press Enter, and look for the network adapter Wireless or Ethernet. Look for the information on the Default Gateway field is the IP address of your router. https://www.facebook.com/notes/printers-help-support-18007605113/procedure-for-setting-printer-online-on-windows/1084714751599103
 Configuring the wireless printer with a static IP address
If you want to configure  your Windows with a static IP address ,then go to the printer’s display and from the screen menu, find the network settings and verify the wired or wireless network settings respectively, and note the current IP address —Setup>Network>View Network Settings>Display Wireless Summary. http://www.apsense.com/article/how-to-fix-a-network-printer-suddenly-showing-as-offline-in-windows-vista-7-or-8.html
Configuring the wireless printer with a static IP address in Windows
Follow the below- given steps to configure the wireless printer:
1 First of all, go to Start, type Devices and Printer and press Enter.
2 Now, right- click on the printer and select Printer Properties.
In order to this, if you are not able to configure these IP settings, then contacting on a toll-free Windows support number for printer connection issues      is the right choice.
3 Navigate to the Ports tab, ensure and select the Standard TCP/IP Port with the name of the printer you intending to fix, and then hit on the Configure Port.
4 In Port Settings, simply change the Printer Name or IP Address with the address you have configured the wireless printer

Network connectivity is one of the main issues on most of the devices. By using these powerful steps you can resolve this problem, if still the problem persists then contacting a reliable third party support providing company is the right choice.

Monday 23 May 2016

Procedure for Setting Printer Online On Windows






If you are a new user for Windows 10 or 8.1 operating system interface, then it’s certain that you are searching for the comparable options as XP or Vista to make printer online from offline state. Usually printers go offline due to network or USB cable connectivity issue, paper jam, out of paper, any other printer hardware faults and sometimes printer driver corruption too. Mostly some of the times printers come back to online automatically when these issues are fixed, below are some of the steps which help you to fix printer issues online manually on Windows 10 or 8.1. In case you face any type of technical issue in fixing printing issue, then contacting Windows 10 technical support for Printer is the right option to opt for.
How to Set/Make Printer Online on Windows 10 and Windows 8.1
·         Firstly go to control panel.
·         From Windows 8.1 or 8, press Windows Key with I (WIN+I) or by using charm bar or else use these ways to reach control panel from this piece of writing.
·         On Windows 10 OS, you can search for other devices and printers by entering ‘devices name’ as and then click on the ‘Devices and Printers’.
·         Tap on Devices and Printers in Large or Small icons in the control panel.
·         Now by applying these steps you will be able to see the offline printers also. Right click on it and select ‘See what’s printing’
If you are not able to fix these printing issues by the above given steps, then dialing the toll-free Windows support phone number for printer issues is the right choice to go for. In case your printer comes online and goes offline again, then there is issue in network connectivity or hardware on your printer. Better is to fix these printing issues and restart the printer again. Here are some of the few printer troubleshooting tips available for Windows 10 and 8.1. Follow the steps given below. https://www.linkedin.com/pulse/run-troubleshooter-resolve-windows-10-printer-issues-macman-truth
If it is a Shared Network Printer
·         If the printer still shows offline, then you need to check the settings of the computer where the printer is attached (if it’s a shared network printer for you). The following settings need to be checked;
·         File and Printer sharing settings
·         Make sure the Network Discovery is turned on and Network sharing services is running
·         Check the firewall and Antivirus/network protection software. These programs might block the incoming connection to shared printer. You can find more details about these steps here.
·         Sometimes this method helps in bringing back the offline printer to online mode on Windows 8.1 and 10.
For more solutions visit the official website of Windows and get reliable solutions from the experts.


Tuesday 17 May 2016

How to Fix A Network Printer Suddenly Showing as Offline in Windows Vista, 7 Or 8






A network printer installed on a Windows Vista starts suddenly showing as Offline even when other machines on the network can access it fine. I originally thought it would be an IP address issue, but it turned out not to be anything to do with that. In fact, the solution was far simpler – but also slightly strange…
It turns out that Windows Vista automatically enables SNMP support for networked printers, and if it can’t get a response to a SNMP message then it assumes the printer is offline. SNMP stands for Simple Network Management Protocol and is a way of getting information from network devices (such as routers, servers and printers), mainly for the purposes of finding out if there are any problems with the devices. A number of networked printers implement SNMP, and will respond to SNMP queries with information, but some don’t. My printer (a fairly old Lexmark T640) is one of the ones that don’t implement it – so of course Vista will never get a response to a SNMP message. The result of which is that the printer will start showing as offline at a seemingly random time because Vista has just sent a SNMP message to it, and it hasn’t responded. http://printershelp.support
Thankfully there is a simple way to fix this – and it just involves telling Vista not to try and communicate with the printer via SNMP. Simply right-click on the printer in the Printers window, chooses the Ports tab, and selects Configure Port. At the bottom you will see a checkbox saying something like SNMP Status Enable. Untick that, and the printer should start showing as online again. Windows 7 technical support for offline printer
That should be it…but here are a few other tips/observations from people who’ve commented on this post:
This has been found to work on a variety of versions of Windows including
·         Windows Vista
·         Windows 7
·         Windows 8
·         Windows 8.1
·         Windows 10
·         Windows Server 2003
·         Windows Server 2008
·         Windows Server 2012
You could need to be logged in as an administrator before you can change the SNMP status. HP printer technical support to fix offline issues
If you find that this solves it for a bit but it keeps going offline again then editing the registry at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print and adding a new DWORD called SNMPLegacy with the value 1 and restarting may solve it.

The issue can be caused even when the printer does support SNMP, but somehow the SNMP communications aren’t getting through – for example, due to a firewall or port configuration issue somewhere on the network.

Monday 16 May 2016

Resolve Dell 540 Printer Issues



Almost everyone has a printer machine these days, allowing them to easily print their documents and photos from home. Dell printers retain a distinguished place in printer industry because of its top quality. The company also has integrated its line of printers with some of its very own features.
The Dell Photo Printer 540 is a printer which is well renowned for printing colored photos. This device can be recognized by the "Dell Photo Printer 540" label on the bottom of the printer. This multi- functional printer was officially released in 2004 and has the capability of connecting to a computer and Flash Memory cards easily. The device acts as a portable and easy-to-use photo printer. The photo printer has an LCD screen and a pull-out printing tray. However, if you are using any device it has its own bad points and good points. While using a Dell printer, if you experience any type of error, then all you have to do is to simply call Dell technical printer toll-free number and get instant solutions from the skillful technicians. http://www.apsense.com/article/fix-a-few-bizarre-printing-problems-in-dell-printer.html
Often it happens that users experience some sort of problems with their printer while working on them. There are several problems which users can face while using their Dell Photo Printer 540 printer. Below is a list of a few problems that users are often experiencing:
Printer does not turn on
If the printer does not turn on, it may be experiencing the following problems.
1. If the power cord is not connecting, then check that the power cord is plugged in and properly and securely connected to the printer.
2. If the printer is still not powering on after checking that the power cord is plugged in, you may need to install a new power switch as your power switch is damaged.
3. Motherboard is not functioning
If after the replacement of the power switch your printer is still not working, then you must then proceed to install a new motherboard board. After applying all these steps if your printer is still not turning on, then you should simply take the help of technical support for Dell Printer from a reliable third party support providing company. The professional technicians offered by the company proffer you quality solutions in a short span of time.
Dell Photo Printer 540 drivers are small programs that facilitate your All-in-One Printer to communicate with your OS software. So it’s better to maintain and updated Dell Photo Printer 540 software and prevent crashes and maximizes your system performance. Using outdated or corrupt Dell Photo Printer 540 drivers can often cause system errors, crashes, and cause your computer or hardware to fail. http://printers-help-support.webnode.com/avail-tech-support-services-to-overcome-dell-printers-issues/
Printer doesn’t recognize the memory card
If your printer is not detecting a memory card then a number of problems may occur:-
1. Memory card is not installed
In case, your printer doesn’t detect your memory card, then simply check that the memory card is installed properly. You can also reinsert the memory card properly.
2. If your printer is unable to read the memory chart, then double click on the memory card and check that at least printer has at least one uncorrected photo file saved on it.
3. In case your printer is still unable to print a properly formatted photo from a correctly installed memory card, then you should simply install a new memory card in the printer.
For more problems and solutions visit the official website of the printer and get quality solutions immediately.


Thursday 12 May 2016

Troubleshoot Your Dot Matrix Printer Troubles








Dot matrix printers are quite popular in corporate sector due to its good printer quality. The ribbons utilized in Dot matrix printers need a good maintenance on a daily basis. The printer is manufactured by different computer manufacturing companies, like Epson, Lexmark, Oki Data, and DASCOM. It might happen that while using Dot matrix printers you may come across with some technical concerns. But in order to resolve a particular issue, you need to search for a tech root cause. Figuring out a technical cause is not complex with certified Dot matrix printer expert. With its help, you will get to know the proper understanding of the frequent Dot matrix printer troubles. Along with this, you will also receive printer printing issues solution conveniently. http://printershelp.kinja.com/get-quality-solutions-for-common-printer-problems-1774200357
Let’s find out some common technical problem which Dot matrix printers usually confront, these include:
  • Flashing lights issue
In case the lights on the printer are flashing, you need to see the printer's instruction manual. Flashing lights in the printer can occur due to cooked system board or low ink to a paper jam.

  • Mystery paper jams
These types of jams are mainly caused by a tiny part of paper lodged beneath the rollers. A Dot matrix printer user can effortlessly remove the rollers for an effective printing result.
  • White lines in graphics or printed text
The common issue which you may confront is the sudden appearance of horizontal white lines in the middle of graphics or printed text. For this, you need to make sure that your print head data ribbon with the ink ribbon is connected tightly to the print head. http://www.reallygoodarticles.com/articles/41066/1/The-Most-Effective-Method-to-Troubleshoot-WiFi-Wireless-Printers/Page1.html

  • Printing gibberish
If your printer is not printing in a correct manner, then you need to check the printer’s dip switch. By connecting the switch properly, you can easily fix the problem.

  • No activity at all
In case you are printing with the help Dot max printer and nothing is happening, then you need to make sure that it is connected to the PC appropriately. Apart from this, you need to check that your computer system hasn’t been redirected to a network printer. Still, if you are unable to fix, then take the assistance of a third party technical company for 24/7 technical support for printer.
Intelli Atlas, an independent tech support provider, offers affordable IT solutions to their customers. For further Dot matrix printer tech concerns, you can visit the official page of the company. Feel free to discuss your technical concerns related to printer issues as per your need.


Wednesday 11 May 2016

Run Troubleshooter to Resolve Windows 10 Printer Issues




Windows 10 had been in pre-discharge or testing stage for quite a while before Microsoft at last discharged it to the world on 29th of July. In spite of being in the pre-discharge stage for near ten months, the last form of Windows 10 is not free from issues.
While most clients are content with the redesign, a little segment of clients have been encountering issues with equipment and drivers.
Numerous clients are reporting issues with the printer in the wake of moving up to Windows 10. A few clients say that Windows 10 can't recognize their printers, keeping in mind some of them are having issues while imprinting on a Windows 10 PC.
In case you're likewise having issues with the printer, you can experiment with the accompanying strategies to deal with printer issues.
Before attempting any of the given underneath strategies, please ensure that the printer is appropriately associated with your Windows 10 PC and is exchanged on.
Method 1
Run the official printer technician
Microsoft knows that a few Windows 10 clients are having issues with printers. Keeping in mind the end goal to help them, Microsoft has discharged a troubleshooter to identify and naturally settle most issues identified with printers. Windows 10 technical support for printer drivers
Click here to download Windows 10 printer technician from Microsoft servers. Subsequent to downloading it, double tap on the document to run it, select Printer from the rundown and afterward click Next catch to start the investigating. It checks for:
·         Print spooler administration mistakes
·         Printer driver redesign
·         Printer network issues
·         Errors from printer driver
·         Printers that are not imparted to the HomeGroup
·         Printer line
The technician additionally checks the toner cartridge and paper jam before attempting to alter the issue. As said some time recently, this technician deals with a large portion of the issues, however in the event that you can't settle experiment with the directions in Method 2.
Method 2
Reinstall or overhaul drivers to determine printer blunders
On the off chance that your printer is not being distinguished by Windows 10, it's reasonable due to obsolete or degenerate driver. To alter the issue, we suggest you physically uninstall the driver and after that introduce the most recent adaptation of the driver. Also, please download the driver just from the producer's site.
In case you're certain that the introduced printer driver is a la mode, we prescribe you cross check the most recent accessible form of the driver with the one introduced on your Windows 10 PC. To know the driver adaptation, experience our how to know the rendition of the introduced driver in Windows guide. Reliable support to fix printer problems
The uninstall the driver, open Programs and Features applet of Control Panel, right-tap on the driver, and after that snap Uninstall catch.
Method 3
Reinstall the gadget
In the event that the printer is now introduced, take a stab at expelling the printer and afterward interface/introduce once more. To evacuate the printer, sort Devices and printers in Start menu seek box, press enter to open Devices and Printers window, right-tap on your printer, click Remove gadget and after that take after on-screen guidelines. http://printershelp.support
Once evacuated, separate the printer and after that interface it once more.

On the off chance that nothing from what was just mentioned specified arrangements work, we exhort you stop for a moment to talk with Microsoft bolster group (free) utilizing the worked as a part of Contact Support application to get your printer's issue settled effortlessly.

Tuesday 10 May 2016

Steps To Resolve Windows Vista and Lexmark Printer Problems





A Lexmark printer does not work with the Windows until you install the included drivers and software. In case you have lost the CD of your printer having software for it, then you can download the drivers from internet use the drivers to install your printer. There are many issues which you can face while using a Lexmark printer and Vista together. This means that you need to resolve each possibility, in turn, to get the equipment up and running in the best manner. Moreover, it is important to know which category your printer is in before you upgrade to OS, and also know where to find the driver if it doesn't come with Windows.
Check peripheral Connections
First of all check all the connections between the printer and your computer. If the printer is attached via USB, switch to an another USB port on the motherboard to get rid of this. For this, you can take the help of Lexmark printer technical support for Vista and resolve your errors vista problems instantly. You can also try switching to an alternative USB cable and connect it to the mains and powered up correctly. If the printer does not appear in the Printers section of the system Control Panel, then "Hardware and Sound" heading, has developed a fault or has not been correctly installed. http://www.idleexperts.com/public/article/index/id/89360
Root Hub device to save power
To resolve this issue, follow these steps:
·         Click Start, right-click My Computer and then click Properties.
·         Click the Hardware tab, and then click Device Manager.
·         Expand Universal Serial Bus controllers, right-click USB Root Hub and then click Properties.
·         Click the Power Management tab, click to clear the Allow the computer to turn off this device to save power check box, and then click OK.
·         Quit Device Manager.
Reinstall Printer
Reinstalling the printer software’s and then re-establishes the connection between the printer and the computer, replaces any key files that may have been corrupted. If the printer option appears in the printers section of Control Panel, then eliminate it by clicking on the printer's icon and choosing "Delete." Then reinstall the printer by applying the instructions with your Lexmark printer manual book. If you have misplaced the manual for your printer, you can also take tech support for Lexmark printer and get expertise help at very affordable rates.

If you are experiencing printing problems with this program, check for the latest updates for this application or to install it again. In case, your Lexmark printer is connected to a wireless network then ensure your network is functioning as expected. Microsoft also offers an automatic troubleshooting tool to fix the issues from its official website. This tool helps you in identifying and resolving the error.

Monday 9 May 2016

Steps To Set Up and Install Your Computer Printer





A printer does not work with the computer until you install the included drivers and software. In case you have lost the CD of your printer having software for it, then you can download the drivers from internet use the drivers to install your printer. Printers are easier to set up and configure. With some printers, you can set up your printer by simply connecting the printer to your PC and a power supply.
You can simply connect your printer to the computer either use a parallel port cable, USB cable, or SCSI cable and then connect to a power outlet. Most of the home computer printers’ users are using a USB cable. http://www.apsense.com/article/get-quality-solutions-for-common-printer-problems.html
How to setup printer and install software
·         Usually, all printers come with the software which is installed into the printer in Windows or your operating system.
·         After complete set up of your computer turn it on.
·         Insert the CD that came with the printer. If the CD does not run automatically, then double-click on the CD drive, and click the Setup or Install file
·         Follow the installation wizard and once completed your software is installed.
·         Test the printer to make certain it is working.
If you are still not able to set up your printer software, then contact a reliable Printer tech support provider company that offers you expert technicians to resolve your printer software issues instantly.
Installing a printer only using the drivers
If you only want to the install the printer driver then follows the steps given below.
·         Open the Control Panel when the printer is connected.
·         Now double-click on the Printers and Fax icon.
·         Click the Add a printer icon in the Printers window.
·         After finishing the above steps, you should see the Windows Printer Wizard. Click Next to start the wizard.
·         Now, you can install a Local or Network printer. If the printer is connected to your computer choose a local printer and click next.
·         After this browse to the directory of your drivers or point it to the printer CD. By applying all these steps, if you are still not able to connect your computer to your printer, then contacting a third party support Provider Company which proffers you technical customer support for printer is the right choice to opt for. http://printershelp.support/fix-printer-problems-errors/
For Microsoft Windows users
·         Click on the Start menu, go to Settings and open Control Panel.
·         Double-click on the Printers and Fax icon.
·         Tap on the Printer you want to test and click Properties
·         In the Printers Properties window, click the Print Test Page button.
If the printer can print a test page, your printer is installed and setup properly. However, if you are unable to print in other programs the program you are attempting to print from has issues.


Thursday 5 May 2016

Use HP Diagnostic Tools to Fix Common Printer Problems





Nowadays, there are a lot of printers which are wireless or network-capable, meaning you can plug in a network cable without actually having to connect the printer to your computer via USB. It’s absolutely unreasonable if you buy a new printer today and it forces you to connect it to your computer for setup. Luckily, setting up a network is far more complicated just because you have to deal with all kinds of equipment in between the two devices (printer and computer).if someone turns on a security feature on your Ethernet router which will prevent communication between your devices on the network. There are literally hundreds of things that can go wrong. If you face any type of problems while using your HP printer, then you can simply contact certified tech support for HP Printer and take reliable support for the same.
Hp print and scan is the free software that helps you to quickly diagnose most of the printing and scanning issues with HP printers. This tool works on everything from Windows XP to Windows 8.1. Unfortunately, there is no Mac version of this tool yet. This program checks a bunch of stuff and actually replaces four separate utilities that help you to have for diagnosing problems with printers. Here’s a quick list of items checked:
·         Connectivity
·         Device Status
·         Driver Check
·         Device Manager
HP print & scan tool is designed to provide the users to overcome any of the common problems experienced with their HP printer. In case you are not able to use this utility tool or you are experiencing some technical glitches while using the tool, you can contact HP Printer technical support experts and resolve your problems in a short span of time. https://www.rebelmouse.com/printershelpsupport/use-hp-print-and-scan-doctor-to-fix-common-printer-problems-1758196752.html
An updated version of HP print and scan the doctor adds support for Windows 8.1, and superior troubleshooting help for the selected issues.
How to install
HP print and scan the doctor does not require installation like all other tools, to use HP print and scan doctor, just download the file and run it. Follow the steps to install HP print and doctor tool. http://www.apsense.com/article/easy-ways-to-fix-common-printer-problems.html
·         Click the Download button, and save the file to your computer.
·         Navigate to the location where you saved the file on your computer.
·         Double click on the file HPPSdr. exe to open and run the tool.
·         Follow the on-screen instructions for using the HP print and scan doctor.
·         HP Print and Scan Doctor for Windows.
HP print and scan doctor, page intends to help you get free utility tool that helps you to quickly fix your printing problems such as scanning and connectivity are common. It is recommended by HP that you run the tool whenever you need to resolve this problem.


Wednesday 4 May 2016

Get Help Resolving Printer Issues on Mac

You click Print, and after that hold up a minute. Nothing happens. Your endeavour has unmistakably fizzled. A brief check affirms that the issue is not restricted to one archive or one application. You can't print anything. Presently what?
The quantity of causes and fixes for print disappointments runs wide and profound over the Mac investigating scene. Here's an agenda of the more basic arrangements.
1. Check the Print discourse box
An outcry mark before the printer's name cautions of inconvenience.
After a fizzled print endeavour, press Command-P once more. You'll likely see an identification symbol, for example, a shout mark, alongside the printer's name in the Print discourse box. You may likewise see a message show up, clarifying the reason for the disappointment and how to alter it.
Locate the right printer: One particularly regular situation happens on the off chance that you print to more than one printer. You may have not chosen the one you expected. In the event that your Mac is a tablet, you may have last printed to your cousin's printer while going to her in Topeka, however now you're back home in Portland. The basic fix is to pick your planned printer from the Print exchange box's Printer pop-up menu. Technical support for HP printer on Mac
Resume a delayed printer: Another basic circumstance is that the printer was beforehand stopped. Assuming this is the case, you'll see a mistake message. Tapping the Resume catch ought to get things going once more. In the event that it doesn't, check the Print Queue, portrayed next, to get more data.
2. Check the Print Queue
On the off chance that a print work has fizzled, the printer's Print Queue symbol ought to stay in the Dock, decorated with an identification that shows inconvenience. To discover more, tap the symbol to open the Queue's window. Try not to see anything in the Dock? Pick Apple menu > System Preferences. Click Print and Scan, select your printer in the rundown and after that snap Open Print Queue.
Resume a delayed printer: Your print line can stop naturally if a print endeavour fizzles, maybe because of a paper jam. On the other hand, you may hit the delay catch yourself on the off chance that you understand you're printing the wrong record or you understand you're going to come up short on paper. It's anything but difficult to leave a printer stopped and forget about it until whenever you go to print. Tapping the Resume catch in the Print Queue has the same impact as doing as such from the Print discourse box.
Dispose of old print occupations: If that doesn't take care of the issue, search for old print employments stuck in the line. In the event that a vocation isn't printable (maybe the archive no more exists), you'll have to erase it from the line before you can print anything more up to date. To do this, snap on the X alongside the advancement bar beneath the archive's name.
Is it an association issue? A second probability is that Print Queue asserts the printer is "not associated" or that it can't "impart" with the printer. You'll discover regular fixes for this issue next.
3. Check the printer itself
In the event that your endeavours to alter things at your Mac's end don't resolve the make a difference, it's a great opportunity to take a gander at the printer itself:
Check for paper: Make beyond any doubt you have paper in the printer's auto-food or manual-bolster plate (whichever one you've chosen to utilize) and that there is no paper jam.
Ensure the printer is on and associated: Check that power is getting to the printer and that the essential links or remote associations are all together.
Play Judas on: Turn the printer totally off and back on. In a perfect world, unplug the printer from the divider outlet in the wake of turning it off. At that point switch the strides. In the event that the mistake message in the Print Queue alludes to a "correspondence" issue, this is particularly prone to offer assistance.
Check ink or toner cartridges: Some demonstrates of inkjet printers are famous for declining to print if any of its various cartridges are out of (or even low on) ink. Regardless of the fact that you are printing content requiring simply dark ink, the printer may shy away if any of the hued inks have run out. Provided that this is true, it's an ideal opportunity to buy refills. https://printerstechsupport.quora.com/Solutions-toResolve-Printer-Issues-On-Your-Mac
Utilizing the Print Queue, you can check ink supply levels or print a test page. Select the Printer menu to see your alternatives. In the event that you have to accomplish broader investigating, tap the Settings catch in the Print Queue window. On the off chance that the printer's product incorporates a demonstrative utility, you ought to have the capacity to get to it from here.
4. Check for printer programming upgrades
Nowadays, overhauling printer programming is normally taken care of by means of OS X's Software Update. Select Apple menu > Software Update. On the off chance that it demonstrates that an overhaul for your image of printer is accessible, introduce it. If not, it's still conceivable that an overhaul exists on the printer's organization site. Assuming this is the case, download and introduce it.
Unless your issue began instantly in the wake of redesigning to another form of OS X, it's impossible that the printer programming is at shortcoming. All things considered, the same programming was probably functioning admirably yesterday. Still, it's justified regardless of an attempt since overhauling may settle the issue if the printing programming has by one means or another get to be tainted.
5. Erase and re-include the printer
Go to Apple Menu > System Preferences and select Print and Scan. From the rundown on the left, select your printer. Click the less sign (- ) catch at the base of the rundown. This expels the printer from the print list.
As yet experiencing difficulty? Utilize the Print and Scan sheet to erase and re-include a printer.
Presently tap the in addition to sign (+) catch. A menu will show up. Ideally, you will see the just erased printer under the header Nearby Printers. Assuming this is the case, select it to include it back. If not, choose Add Printer or Scanner. By and by, you will ideally discover the printer in the Default postings. Provided that this is true, select it in the rundown and after that snap Add.
Utilize an IP address: Networked printers here and there take somewhat additional work. Select the in addition to sign (+) and pick Add Printer or Scanner. At the point when the Add window shows up, snap IP at the highest point of the window. Here you can enter the printer's location on the system. See this Bugs and Fixes segment for guidance about how to make sense of your printer's IP address. http://printershelp.edublogs.org/2016/04/21/some-of-the-common-printer-problems-and-their-solutions/
 Stay away from printer sharing in the event that you can: If you see your printer recorded with a @ sign, for example, CannonMP990 @ MacBook Pro, selecting this implies you will interface with the printer through printer sharing—an element empowered from the Sharing System Preferences sheet. Unless you have a setup that requires getting to the printer along these lines, don't choose this. Rather, pick an option posting for the printer. Something else, regardless of the possibility that your endeavor to re-include the printer succeeds; you may have the capacity to print when the sharing Mac is accessible.
6. Check the blunder log for intimations
Still baffled? Come back to the Print Queue application and select Printer > Error Log. This dispatches the Console application and particularly opens an error_log document that rundowns conceivable reasons for your print disappointment. The yield is a long way from easy to understand. In any case, there may sometimes be some plain-English content that proposes what the issue is. For instance, once I could make sense of a dishonourably introduced ink cartridge was at fault for my printing issues. I should have simply needed and effectively reinstall the cartridge.
7. Reset Printing System
As yet sitting tight by the printer for a sheet of paper to show up? Come back to the Print and Scan inclinations sheet one final time. Presently Control-click (Right-click) the name of the printer to raise its logical menu. From the rundown of things, select Reset printing framework.

As the ensuing exchange box illuminates you, this "will erase the majority of your current printers, scanners, and faxes, and the greater part of their pending employments." at the end of the day, it will leave your printing status verging on back to where it was the point at which you initially unpacked your Mac. Not a glad prospect, but rather if nothing else has helped, this might be your last week after triumph.